Products >> Enclosures / Sub-Boxes >> Custom Fiberglass Boxes >> Los Labs GM2X1246

Features

Specs

Fitment & Policies

Images

• Enclosure
  - 3/4" MDF Frame with Molded Fiberglass face
  - Dual (2) 12" Subwoofer Recessed-Mounting Cutouts
  - Amplifier Rack centered between subwoofers
  - Dual Chamber Design ~ 1.5 Cubic Ft. each (unloaded)
  - 100% Air Tight Resin-Sealed Interior
  
  
• Dimensions
  - Enclosure: 46"W x 16"T x 16"D
  - Amp Rack: 13"W x 22"H
  - Cutouts:
  outer: 13" diameter
  inner: 11" diameter
  recession: 0.79" (2cm)
  - Subwoofer Mounting Depth: 10"
  - Mounting Rings are 1/2" MDF with 1/4" Reinforced Fiberglass (3/4" total)
  
  
• Weight
  - Enclosure: ~ 60 lbs.
  - Shipping Weight: ~ 70 lbs.
  
  
• Inputs
  - Includes 2 Terminal Cups
  - Gold Plated Binding Posts, Banana Plug Compatible
  - Accepts up to 10 AWG speaker wire
  
  
• Finish
  - Primed at 240 grit or finer
  - Ready for Wet Sand & Paint

Vehicles
This enclosure was designed for all GM mid and full-sized SUVs. Please be sure to check your individual vehicle to ensure it will fit an enclosure with the dimensions of 46"W x 16"T x 16"D.

Subwoofers
The cutouts of this enclosure provide the "majority" of 12" subwoofers with a perfect, recessed fit. However, there are subwoofers on the market that need more than the standard 11" mounting cutout (such as the Audiobahn High Excursion AW1200N). PLEASE NOTE! - we will customize the inner cutout to fit your subwoofer at no charge. Please check your specific subwoofer's specifications, and be sure to let us know in your order comments at checkout if you need a different-sized mounting inner cutout

Policies
Enclosures are built upon order, ship 7 business days from receipt of order, and are guaranteed free from Manufacturer defect. Due to the nature of customization and installation, no refunds are accepted - only exchanges (if the enclosure is found to have a defect).

Shipments are fully insured via UPS ground and require an adult signature upon delivery. PLEASE NOTE: in order for us to ensure that there was no damage during shipping, you must unpack the enclosure and check it for any damage when the driver delivers! This is the only way we will be able to send a new enclosure out - otherwise, the insurance claim process can take a lengthy amount of time and is not guaranteed (ie - UPS can say the damage occurred after delivery was made), and we may be unable to provide a replacement.

Please find additional images of this enclosure below
(note: paint not included - these images are for installation examples only)

(click on images for larger view)